seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Luggage compartment light switch: Removing and installing > < Interior light: removing and fitting, vehicles with sun roof
Interior light: Removing and installing, vehicles without sun roof
Interior light: Removing and installing, vehicles without sun roof
Removing
   
–  Separate the diffusion glass from the interior light by prising it carefully and remove it -1- .
–  Remove the securing bolts 2 that are now visible.
–  Release the hooks by levering with a screwdriver in B and then remove the interior light from the vehicle roof 3.
–  Remove the connector -4-.
Installing
  A96-0165
–  Attach connector -4-.
–  Fit the interior light 3 on side A and secure it on the opposite side B.
–  Fit the star headed screws 2and tighten them.
–  Fit the interior light diffuser 1.
  Note
t  To replace the bulb it is only necessary to separate the diffuser glass levering carefully with tool -U-30800-.
t  The internal illumination bulb 6: 12 V / 10 W.
t  The reading light bulb 5: 12 V / 5 W.
  A96-0165

Luggage compartment light switch: Removing and installing > < Interior light: removing and fitting, vehicles with sun roof