seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Docking station: A-pillar > < Relay carrier: removing and installing

Leon Mk2

Power distributor: Removing and installing
Power distributor: Removing and installing
The power distributor is located above the relay plate
Removing
–  Disconnect the negative terminal of the battery.
To access the power distributor it will be necessary to remove the box tray on the driver side
–  Remove the shelf from the driver side of the vehicle: → Body, interior installation work; Rep. Gr.70
   
–  Remove the bolt -arrow-and remove the power distributor.
Installing
Install in reverse order
–  Make sure that the power distributor is correctly located in its housing.
  E97-0098

Docking station: A-pillar > < Relay carrier: removing and installing