seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Full clamp with insert > < Set of release toolsSAT 2100A
Description of the tools
Description of the tools
  WARNING
Injury risk!
t  Observe the stickers in the vehicle warning about components exposed to high voltages. Remaining voltage must be dissipated before commencing repair work.
t  Some tools are equipped with a tool safety device. This must be pushed over the tip of the tool after use in order to protect the tip and prevent personal injury.
  Caution
t  Pay attention to the relevant regulations in the individual countries.
t  Disconnecting the battery earth cable prevents accidents when working on the vehicle electrical system. With ignition switched off, disconnect earth wire at battery → Electrical system; Rep. gr.27.
t  Before starting repair work, it is vital to eliminate the cause of the damage in question, e.g. body parts with cutting edges, faulty electrical loads, rust etc.
  Note
t  Do not loosen earth straps on body if this can be avoided (danger of corrosion).
t  Other information, like for example installing and removing different components, is provided in the corresponding Repair Manual.
   

Full clamp with insert > < Set of release toolsSAT 2100A