| The threaded clamp -VAS 1978/1A- or the threaded clamp (basic body) -VAS 1978/1-2- together with the interchangeable head 0.35-2.5mm/2 -VAS 1978/1-1-, or the interchangeable head 4.0-6.0mm/2 -VAS 1978/2A- is used to close the pressure connections of the wiring harness repair kit. |
| Crimp the pressure connections with the threaded clamp -VAS 1978/1A- → Chapter. |
| The threaded clamp (basic body) -VAS 1978/1-2- has available the following interchangeable heads: |
| t
| Head adapter 0.35 mm2 - 2.5 mm2 -VAS 1978/1-1- |
| t
| Head adapter 4.0 mm2 - 6.0 mm2 -VAS 1978/2A- |
| t
| Interchangeable head for JPT contacts -VAS 1978/9-1- |
| In combination with the interchangeable head for contacts JPT -VAS 1978/9-1- use the threaded clamp to thread the individual wire contacts for repairing the wires with sections smaller than 0.35 mm2 → Chapter. |
| Substitute the interchangeable head: |
| –
| Fully open the threaded clamp. |
|
|
|
