The displayed fault information is only updated when the self-diagnosis is started or the function 05 “Erase fault memory” is selected. The information is not continuously updated.
–
Initiate self-diagnosis of dash panel insert → Chapter.
–
Switch on the printer with the PRINT key (indicator lamp in key lights up).
Note!
Fault codes appear only on print-out of Fault reader -V.A.G 1551-.
Indicated on display:
–
Press keys 0 and 2. (02 selects the function “Read fault memory”).
Rapid data transfer HELP
Select function XX
Indicated on display:
–
Confirm entry with Q key.
Rapid data transfer Q
02 - Read fault memory
The number of faults stored appears in the display.
The stored faults are displayed and printed out one after another.
–
Check print out against fault table and rectify all faults as necessary → Chapter.
X faults recognized!
If “No fault recognised” is displayed the programme will return to the start point after pressing → key.