seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Adaption (overview) > < Reading data block

Leon Mk2

Overview of selectable display group numbers
Overview of selectable display group numbers
   
Indicated on display: (1...4 = display zones)
  
Read data block                   XXX ->
  1     2     3     4
Display groupDisplay zone on display
0011 = distance impulse
2 = speed in km/h
3 = engine speed in rpm
4 = fuel consumption at driving speed
< 10 km/h in l/h or
> 10 km/h in l/100km
0021 = distance travelled counter in km
2 = coolant temperature in °C
3 = oil temperature in °C
4 = ambient temperature in °C → Note
0031 = fuel in tank in l
0041 = oil pressure switch 1 < min
2 = oil pressure switch 2 < min
3 = button for odometer
4 = multifunction display call-up key 1 or multifunction display call-up key 2

1)  On vehicles fitted with Climatronic these display zones remain vacant.
–  Press keys for display group number to be selected and confirm input with Q key.
Example of a display group number in data block:
–  Press keys 00 and 4 for display group 4 and confirm entry with Q key.
   
Indicated on display:
Display group 004:
  
Read data block                   004 ->
oil p1OK   oil p2OK   T-KM key mem.1
Display exampleDisplay zonePossible display
Oil p1OK1 = Oil pressure at oil pressure switch (0.3 bar)Oil pressure is:
t  OK
t  Not OK
Oil p2OK2 = Oil pressure at oil pressure switch (0.9 bar; 1.4 bar; 1.8 bar)Oil pressure is:
t  OK
t  Not OK
T-KM button3 = Button for odometerButton operated:
t  T-KM button
MFD mem.14 = Call-up button 1 for
multifunction display		Button operated:
t  MFD mem. 1 button

  Note!
t  The display will always show the actual values obtained from the senders and sensors. The values on the dash panel insert are filtered and therefore they can vary!
t  Other display groups are possible but these are not required for fault finding.
After checking the displayed values:
–  Press → key.
   
Indicated on display:
  Note!
After completing the function “read data block” then read fault memory → Chapter.
  
Rapid data transfer                 HELP
Select function XX

Adaption (overview) > < Reading data block