seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Halogen headlamps: Removing and installing > < General description
Assembly overview
   
Assembly overview
1 - Headlight
q   removing and installing → Chapter
q   Adjusting headlight installation position → Chapter
q   Headlights: Adjust convergence → Chapter
q   Headlights: Check adjustment → Chapter
2 - Headlight attachment setting sleeve
q   Adjusting headlight installation position → Chapter
3 - Securing bolt: Headlamp on the bodywork.
q   Tightening torque: 4 Nm
4 - Bracket securing bolts to body
q   Tightening torque: 4 Nm
5 - Side light bulb, left side -M1- / daytime running light, left side -L174- or Side light bulb, right side -M3- / daytime running light, left side -L175-
q   12 V, 5 W/21 W bulb
q   replace → Chapter
6 - Bulb for front left turn signal -M5- or bulb for front right left turn signal -M7-
q   12 V, 21 W bulb.
q   replace → Chapter
7 - Left headlight range control motor -V48- or right headlight range control motor -V49-
q   Removal and installation
8 - Rubber cover
q   Dipped / full-beam lights
9 - Bulb for the headlight dipped beam, left side -M29-/bulb for the headlight full-beam, left side -M30- or bulb for the headlight dipped beam, left side -M31-/bulb for the headlight full-beam, right side -M32-
q   H4 12 V, 55 W bulb
q   replace → Chapter
10 - Guide sleeve headlight attachment on the bodywork
q   Adjusting headlight installation position → Chapter
11 - Securing bolt: Fixing support for the headlamp
q   Tightening torque: 4 Nm
12 - Fixing support for the headlamp

   

Halogen headlamps: Removing and installing > < General description