Fabia Mk1
Summary of components trailer coupling |
1 - | Trailer coupling frame |
t | Removing: |
– | Remove trailer arm -4-. |
– | Insert dummy plug -5-. |
– | Remove the rear bumper → Chapter. |
– | Remove plug connection -8-. |
– | Remove screws -2-. |
– | Remove trailer coupling frame from vehicle. |
t | Installation is carried out in the reverse order. |
2 - | 70 Nm |
3 - | Protective cap |
4 - | Trailer arm |
t | Removing: |
– | Push control lever down 90 °. |
– | Open lock on control lever. |
– | Remove trailer arm and put control lever back to initial position. |
t | Installing: |
– | Installation is carried out in the reverse order. |
5 - | Dummy plug |
t | Insert in trailer arm hole. |
6 - | 2.5 Nm |
7 - | Base |
8 - | Plug connection |
t | Removing: |
– | Release screws -6-. |
– | Disconnect electrical installation. |
t | Installing: |
– | Installation is carried out in the reverse order. |
Note
Use the plug connection and electrical installation type recommended in the country specific instructions. |
9 - | Gasket |
10 - | Support |