Fabia Mk1
Summary of components |
1 - | Door |
q | removing and installing → Chapter |
2 - | Door handle |
q | removing and installing → Chapter |
3 - | Lock cylinder housing |
q | removing and installing → Chapter |
4 - | Cap |
5 - | 20 Nm |
6 - | Door trim panel |
q | removing and installing → Chapter |
7 - | Securing knob |
q | removing and installing → Chapter |
8 - | Locking rod |
9 - | Boot |
10 - | 22 Nm |
11 - | Locking clamp |
12 - | Door lock |
q | removing and installing → Chapter |
13 - | Bowden wire |
14 - | Inside door control |
15 - | Screw |
q | for vehicles ? 05.05 (M10x26): 72 Nm |
q | for vehicles 06.05 ? (M10x28): 40 Nm |
16 - | 30 Nm |
17 - | Bottom door hinge |
18 - | Screw |
q | for vehicles ? 05.05 (M10x26): 72 Nm |
q | for vehicles 06.05 ? (M10x28): 40 Nm |
19 - | Hinge bolt |
20 - | Window crank |
q | removing and installing → Chapter |
21 - | 7 Nm |
q | for door arrester |
22 - | 30 Nm |
23 - | Door arrester |
q | Removing: |
– | Remove door trim panel from the bottom of pillar A. |
– | Release screws Pos. 21 and Pos. 22. |
– | Push door arrester inwards and remove from pillar A. |
q | Installing: |
– | Installation is carried out in the reverse order. |
24 - | Top door hinge |