skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Summary of components windscreen > < Glued windows

Fabia Mk1

Removing and installing glued windows
Removing and installing glued windows
  Note
For safety reasons, re-using a cut-out windscreen is not permissible. The windscreen must always be replaced with a new original part. The cut-out rear and side windows can be re-used after a thorough inspection.
Special tools and workshop equipment required
t  Cutting cord or cutting wire holder, e.g. -TWH 200- and -DGE 100- manufactured by the company Equalizer.
t  Straightening knife e.g. -SB - 531- or glass scraper -SC-170-.
t  Device for inserting cutting cord or cutting wire.
t  Spooler e.g. -V.A.G 1654A- with steering roller with counterholder -V.A.G 1474/1-
t  Cutting wire e.g. -357 853 999 A-.
t  Cutting cord e.g. -357 845 955-.
t  Cup suction tool e.g. -V.A.G 1344- or tool manufactured by the company Equalizer -ESM 911-.
t  Cartridge heating box e.g. -V.A.G 1939A-.
t  Compressed air pistol, e.g. -V.A.S 5237-.
   
Adhesive materialsSpare part No.Purpose, application rangeDenomination, manufacturer, comment
2K Window glue (PUR)-DA 004 600 A2- → NoteStrong glueing of the windscreen, rear and side windows. Adhesive cement hardens fast so the work must be done swiftly and skillfully.Caution: Comply with the manufacturer's handling instructions.
1K Window glue (PUR)-DH 009 100- → Note → NoteStrong glueing of the windscreen, rear and side windows.300 ml filling
1K Window glue (PUR)-DH 009 100 03- → Note → Note → NoteStrong glueing of the windscreen, rear and side windows.110 ml small filling
Activator- AMV 181 800 02-Activates the previously sectioned original layer. 
Applicator- D 009 500 25-Apply primer and activator.Order volume 25 pieces
Primer for windows and painted surfaces.-D 009 200 02-Priming the windows. Must be applied to window. Is applied to paint before applying glue and sealant (PUR). 
Cleaning solution-D 009 401 04-For cleaning all surfaces to which primer or glue is applied. 
Glue remover-D002 000 10-Removes residual glue.Must not be used on glued surfaces before glueing.

1)  Respect hardening time.
2)  Heat according to manufacturer's instructions with cartridge heater e.g. -V.A.G 1939-.
3)  Small cartridge 110 ml for sealing work, or if 300 ml cartridge is not adequate.
   

Summary of components windscreen > < Glued windows