skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Summary of components of rear door trim panels > < Summary of components of front door trim panels
Removing and installing the front door trim panel
Removing and installing the front door trim panel
Special tools and workshop equipment required
t  The recessed handle removal tool -V 19L 193-
Removing
   
–  Place the removal tool -V 19L 193- in the opening of the lower part of the recessed handle -arrow A- in such a way that the retaining lug of the removal tool tangibly interlocks with the recessed handle cover.
–  Pull out the removal tool -V 19L 193- from the door trim panel -arrow B- and release the recessed handle cover -1- upwards.
For vehicles with electric window lifters
–  Unplug connector from the window lifter switch.
For vehicles with mechanical window lifters
–  Remove window crank → Chapter.
For all vehicles
  S70-0281
–  Slide recessed handle -1- cover forward -arrow- and take off from door handle-2-.
  S70-0184
–  Unclip cap -1-.
–  Release screws -arrows-.
–  Unclip door trim panel -2- at the sides.
–  Unhook the activation control cable of the door handle.
–  Remove the light -3- and disconnect the plug connection.
–  Remove door trim panel -2-.
Install
Installation is carried out in the reverse order.
  S70-0186

Summary of components of rear door trim panels > < Summary of components of front door trim panels