skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing window crank > < Summary of components of rear door trim panels

Fabia Mk1

Removing and installing the rear door trim panel
Removing and installing the rear door trim panel
Removing
   
–  Place the removal tool -V 19L 193- in the opening of the lower part of the recessed handle -arrow A- in such a way that the retaining lug of the removal tool tangibly interlocks with the recessed handle cover.
–  Pull out the removal tool -V 19L 193- from the door trim panel -arrow B- and release the recessed handle cover -1- upwards.
For vehicles with electric window lifters
–  Unplug connector from the window lifter switch.
For vehicles with mechanical window lifters
–  Remove window crank → Chapter.
For all vehicles
  S70-0282
–  Unclip cap -1-.
–  Release screws -arrows-.
–  Unclip door trim panel -2- at the sides.
–  Unhook the activation control cable of the door handle.
–  Remove the door trim panel -2- and unplug the relevant plug connections.
Install
Installation is carried out in the reverse order.
  S70-0187

Removing and installing window crank > < Summary of components of rear door trim panels