| Replace reservoir of engine pump aggregate |
Note | t
| Absolute cleanliness is required when replacing the reservoir. |
| t
| Clean thoroughly the area between the connection fitting for return flow at the reservoir and connection for pressure line at the engine pump aggregate before separating via the entire circumference, but do not use any aggressive cleaning agents, such as brake cleaner, petroleum, thinner or similar. |
| t
| Place removed parts on a clean surface and cover. |
| t
| Carefully cover or close opened components if the repair is not completed immediately. |
| t
| Do not use fluffy cloths. |
| t
| Remove spare parts from their wrapping immediately before fitting. |
| t
| Use only genuine wrapped parts. |
| t
| The contact surface of the reservoir/engine pump aggregate must not come in contact with sealants. |
|
|
|
