skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Wheel with steel rim > < Removing and installing the axle stud - Disc brake
Wheels, Tyres
Wheels, Tyres
Wheel/tyre combinations → Chapter.
Further information can be found in the instructions for use or → BookletFabia.
Tyre assembly:
For tyre disassemblies and assemblies the mounting device must be equipped with a tyre assembly head provided for these disc wheels.
  WARNING
Otherwise there is a risk of damage to the disc wheel.
General points
For safety reasons never change tyres individually but at least in axle pairs.
Tyres with the greatest tread depth must always be fitted at the rear.
It is recommended to fit tyres of the same make, same type and tread pattern on all wheels.
Only tyres of the same brand, same type and tread pattern must be fitted on the same axle.
When replacing the disc wheel or the tyre always fit on a new rubber valve.
  Note
Before installing the wheel, coat the centering of the hub with grease -G 052 753 A2-.
Mount the tyre with the DOT marking pointing towards the outside of the wheel. This applies only to the left side of the vehicle for directional tyres.
For directional tyres mount a wheel/tyre combination for the right side of the vehicle as spare wheel.
   

Wheel with steel rim > < Removing and installing the axle stud - Disc brake