skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Checking hydraulic balancing elements > < Removing and installing camshaft

Fabia Mk1

Removing and installing rocker arms
   
Removing and installing rocker arms
1 - Rocker arm shaft
q   removing and installing → Chapter
2 - Circlip
3 - Rocker arm bracket, on outside
q   for M11 cylinder head bolt
4 - Spring washer
5 - Rocker arm
6 - Adjusting screw
q   Perform basic setting of hydraulic valve clearance compensation → Chapter
7 - Counternut, 13 Nm
8 - Rocker arm bracket
q   for M8 bolt
9 - Rocker arm
q   pay attention to different version → Fig.
10 - Rocker arm bracket, on inside
q   for M11 cylinder head bolt
11 - Tensioning ring
12 - Spring

   
Arrangement of rocker arms and rocker arm brackets
1 - Straight rocker arm
2 - Inclined rocker arm, to the left
3 - Inclined rocker arm, to the right
A - Rocker arm bracket for M11 bolt, on outside
B - Rocker arm bracket for M8 bolt
C - Rocker arm bracket for M11 bolt, on inside
  Note
The rocker arms for the inlet valves are shown in dark in the illustration.
  S15-0132

Checking hydraulic balancing elements > < Removing and installing camshaft