| Removing and installing parts of the lubrication system |
Note | t
| If considerable quantities of metal swarf or abrasion (caused by rubbing damage such as damage to the crankshaft and conrod bearings) is found in the engine oil when carrying out engine repairs, carefully clean the oil galleries in order to avoid consequential damage. |
| t
| The oil level must not be above the max. marking - risk of damage to catalytic converter! |
| t
| Only on 1.0 ltr. engine: longer oil pan bolts on bracket for coolant pipe, at front → Item pay attention to these bolts, do not mix up! |
| Capacities and oil specification |
|
|
|
