skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Testing cruise control system > < Testing clutch pedal switch F36

Fabia Mk1

Activating and deactivating cruise control system (CCS)
Activating and deactivating cruise control system (CCS)
Special tools and workshop equipment required
t  Vehicle system tester -V.A.G 1552 - with cable -V.A.G 1551/3, 3A, 3B, 3C-
Test conditions
l  No fault should be stored in the fault memory → Chapter.
Test sequence
–  Connect vehicle system tester -V.A.G 1552-. Switch ignition on and select address word 01 “Engine electronics” → Chapter.
   
Readout on display, e.g.:
If “MARELLI 4LV G” is displayed, CCS is activated.
  
036906034F  MARELLI 4LV G        2615 ->
Coding  00031                   WSC XXXXX
Readout on display, e.g.:
If “MARELLI 4LV” is displayed, CCS is not activated.
  
036906034T  MARELLI 4LV          2615 ->
Coding  00031                   WSC XXXXX
–  Press → and select function 11 “Login procedure”.
Enter the code number by referring to table below and confirm entry with Q.
  
Login procedure
Enter code number XXXXX
Code numberCruise control system (CCS)
11463Cruise control system (CCS) is activated
16167Cruise control system (CCS) is deactivated

–  Select function 06 “End output” and switch ignition off.
After activating the cruise control system perform a test drive as a functional test.
   

Testing cruise control system > < Testing clutch pedal switch F36