Fabia Mk1
| Summary of components for heating and air conditioning system control |
Note| All the listed components are elements of the heating and air conditioning system control and must not be replaced individually. |
| 1 - | Control for heating and air conditioning system |
| q | with air conditioning system control unit -J301- |
| t | connected to other control units via a data bus |
| t | receives information about the heating and cooling output requirement and sends corresponding signals to the regulating valve for the compressor or the temperature flap control motor |
| t | is checked in the self-diagnosis → Chapter |
| 2 - | Plug - air conditioning wiring loom |
| 3 - | Plug - vehicle wiring loom |
| 4 - | Flex shaft |
| q | for positioning unit for air distribution flaps |
| q | removing and installing → Chapter |
| 5 - | Switch for fresh air blower -E9- |
| q | 4 speeds |
| q | The air conditioning system is only activated when the fresh-air blower is switched on |
| 6 - | Rotary switch for air distribution flaps |
| q | manual control of the flaps via the flex shaft → Item |
| q | fresh-air operation is automatically activated (no misting up of windscreen) if “defrost” is switched on during re-circulating air operation; return to re-circulating air operation by again pressing the re-circulating air button. |
| 7 - | Dash panel temperature sensor -G56- |
| q | with temperature sensor blower -V42- |
| 8 - | Switch for air conditioning system -E35- |
| q | The air conditioning system is only activated when the fresh-air blower is switched on |
| 9 - | Switch for fresh air and re-circulating air flap -E159- |
| 10 - | Potentiometer for temperature selector -G267 - |
| q | Control of interior temperature from 16 to 31 °C |
| q | turning the rotary switch to the left or right up to the stop deactivates the temperature control (temperature flap is fully open or fully closed) |
| q | if the ambient temperature is higher than the set interior temperature, the air conditioning system must be activated. |
