| Measure limit speed of the hydraulic converter |
Note | t
| The limit speed of the hydraulic converter is the engine speed on the braked vehicle with the selector lever in position “D”. |
| t
| The limit speed drops as the altitude above sea level increases (approx. 125 rpm per 1000 m). |
| Special tools and workshop equipment required |
| t
| Vehicle system tester -V.A.S 5051 A,B,C - |
| t
| Vehicle system tester -V.A.S 5052 - |
| t
| Vehicle system tester -V.A.G 1551- |
| t
| Vehicle system tester -V.A.G 1552- |
| –
| Select function 08 “read measured value block” and display group number 001. |
| –
| Securely lock the vehicle with the hand and foot brake. |
| –
| Place selector lever in selector lever position “D” |
| –
| Briefly apply full throttle (max. 5 s), if necessary repeat test after 20 s. While doing so the speed listed in the table must be reached. |
| –
| If the final speed is not reached, the following faults may be present: |
|
|
|
