skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing bracket > < Removing and installing the over-centre helper spring

Fabia Mk1

Removing and installing the clutch pedal
Removing and installing the clutch pedal
Removing
–  Removing bottom part of the dash panel → Body work → Rep. Gr.70.
–  Remove the over-centre helper spring → Chapter
   
–  Unscrew the nut -A- and pull screw out of the bracket.
–  Remove clutch pedal.
Install
Installation is performed in the reverse order. Pay attention to the following points:
  S30-0054
–  The support -A- must be located on the actuating rod -B- of the master cylinder.
–  To click in the support push the clutch pedal towards the front wall -direction of the arrow- and make sure it catches correctly.
  V30-0419
Tightening torque
ComponentNm
Clutch pedal to bracket → Chapter

   

Removing and installing bracket > < Removing and installing the over-centre helper spring