Fabia Mk1
|
1 - | Bushing |
q | for the gearshift shaft |
q | extracting and inserting → Chapter |
2 - | Gearshift shaft with cover |
q | replace jointly |
3 - | Locking bolt |
q | for setting the gearshift mechanism |
q | removing → Fig. |
q | inserting → Fig. |
4 - | Reversing lever |
q | Fitting position → Chapter |
q | after installing set shift mechanism → Chapter |
q | made out of plastic or metal |
q | Metal relay lever is located in the bushings Pos. 5 and secured with a lock washer Pos. 10 |
q | as of 06.06 plastic relay lever |
q | Remove and install plastic relay lever together with cable lock for selector cable → Chapter |
q | Bushings pos. 5 and lock washer pos. 10 are not required for plastic relay lever |
5 - | Bushing |
q | is not required for plastic relay lever |
6 - | Gasket ring |
q | lever out with screwdriver |
q | inserting → Fig. |
7 - | Cap |
q | for gearbox bleeder |
8 - | Gearshift lever |
q | with balancing weight |
q | insert in such a way that the interrupted spacing of the teeth matches the gearshift shaft → Fig. |
q | may be replaced with the gearshift mechanism mounted |
q | Fitting position → Chapter |
9 - | 20 Nm |
q | replace → Electronic Catalogue of Original Parts |
10 - | Lock washer |
q | replace → Electronic Catalogue of Original Parts |
q | is not required for plastic relay lever |
|
|
|
|