Fabia Mk1
| Repairing gearshift lever and shift housing as of 06.06 |
Note| Grease bearing and friction surfaces with grease -G 000 450 02-. |
| 1 - | Lock washer |
| q | removing and installing → Fig. |
| 2 - | Pressure spring |
| q | removing and installing → Fig. |
| 3 - | Gasket |
| q | between shift housing and underbody |
| q | self-adhesive |
| q | stick onto shift housing |
| 4 - | Shift lever |
| 5 - | Damping |
| q | removing and installing → Fig. |
| 6 - | Shift housing |
| 7 - | Insulating washer |
| q | mus be in the round slot -arrow- of the gearshift lever |
| 8 - | Gasket |
| q | replace → Electronic Catalogue of Original Parts |
| 9 - | Floor plate |
| q | bend up tabs for removing |
| q | replace → Electronic Catalogue of Original Parts |
| 10 - | Bush |
| 11 - | Selector cable |
| q | lever off from the selector angle plate within the shift mechanism |
| q | press onto the selector angle plate within the shift mechanism |
| q | Fitting position → Chapter |
| 12 - | Shift cable |
| q | lever off from the shift lever guide within the shift mechanism |
| q | press onto the shift lever guide within the shift mechanism |
| q | Fitting position → Chapter |
| 13 - | 25 Nm |
| q | 4 pieces |
