Fabia Mk1
Charge air cooling - Summary of components |
Note
t | The hose connections are secured with clamps. |
t | The charge-air system must be tight. |
t | Remove oil and grease from the charge pressure hoses and charge pressure pipes and from their connections before installing. |
1 - | Air deflector |
2 - | Charge air cooler |
q | removing and installing → Chapter |
3 - | 8 Nm |
4 - | O-ring |
q | replace if damaged |
5 - | Intake manifold pressure sender -G71- with intake manifold temperature sender -G72- |
6 - | Support |
7 - | 5 Nm |
8 - | Connecting hose |
9 - | Top charge-air pipe |
10 - | Connecting hose |
q | for engine with identification characters AMF |
11 - | To connection fitting |
12 - | Connecting hose |
q | for engine with identification characters BNM, BNV |
13 - | From air filter |
14 - | Rear charge-air pipe |
15 - | Pipe for crankcase ventilation |
16 - | Pipe with heating |
q | for nordic countries |
17 - | From valve block |
18 - | Exhaust gas turbocharger |
19 - | Bottom charge air pipe |
20 - | Support |
q | screwed onto oil pan |