Fabia Mk1
For engine with identification characters BUD |
1 - | Intake manifold |
2 - | Bleeder hose |
3 - | Solenoid valve -N80- |
q | attached with bracket to the intake manifold |
q | Valve is actuated from the engine control unit (pulsed) and closed when the ignition is switched off |
4 - | Bleeder hose |
5 - | Vent line |
q | from solenoid valve -N80- (in engine compartment) |
6 - | Pressure regulating valve with vent line |
q | from gravity valve to fuel tank |
q | check for firm seating |
7 - | Activated charcoal filter |
q | Fitting location: in rear right wheelhouse |
q | attached to the vehicle body |
q | Check fuel tank ventilation → Chapter |
q | removing: |
– | Removing the rear right wheel. |
– | Remove plastic wheelhouse liner → Body Work → Rep. gr.66. |
– | Disconnect lines -5- and -6-. |
– | Remove screw -8-. |
– | Push filter down. |
q | Installing: |
– | Installation is carried out in the reverse order. |
8 - | 10 Nm |