Fabia Mk1
Fuel tank with component parts - Summary of components |
1 - | Fuel tank |
q | removing and installing → Chapter |
2 - | 25 Nm |
3 - | Tensioning strap |
4 - | Vent line |
q | white |
q | to solenoid valve 1 for activated charcoal filter -N80- in engine compartment |
5 - | Fuel return-flow line |
q | blue |
q | from the fuel pressure regulator on the fuel distributor |
6 - | Fuel feed line |
q | black |
q | to the fuel pressure regulator on the fuel distributor |
7 - | Fuel filter |
q | Fitting position: arrow points in direction of flow |
8 - | 5 Nm |
q | for collar clamp for fuel filter |
9 - | Fuel gauge sender -G- |
q | removing and installing → Chapter |
10 - | Fuel delivery unit |
q | removing and installing → Chapter |
q | Clean strainer if dirty |
q | Fitting position of flange of fuel delivery unit → Fig. |
11 - | Return-flow line |
q | blue |
12 - | Feed line |
q | between the fuel delivery unit and the fuel filter |
q | black |
13 - | Sealing ring |
q | moisten with fuel before installing |
14 - | Union nut, 80 Nm |
q | removing and installing with tool -MP1-227 (3217)- |
15 - | Vent valve |
q | to remove, unclip valve at side and take out of filler neck. |
q | before installing, unscrew screw cap -Pos. 16- |
q | check → Fig. |
16 - | Screw cap |
17 - | 1,5 Nm |
18 - | Fuel tank lid unit |
q | with rubber bowl |
19 - | Gravity valve |
q | to remove, unclip valve at top and lift out of filler neck |
q | inspect valve for blockage: |
t | Valve in a vertical position: open |
t | Valve tilted 45°: closed |
20 - | Vent line |
q | between activated charcoal filter -Pos. 21- and vent line -Pos. 4- |
21 - | Activated charcoal filter |
q | Overview of vent system of the activated charcoal filter system → Chapter |
22 - | 10 Nm |
23 - | Vent line |
q | clipped in place on fuel tank |
Note
|