skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Brakes, hydraulics, regulator, servo > < Removing and installing the foot controls as of MY 2011

Fabia Mk2

Removing and installing the brake pedal as of MY 2011
Removing and installing the brake pedal as of MY 2011
Removing:
–  Remove the foot controls → Chapter.
   
–  Turn the bearing axle to the left in -direction of arrow- using a 10 mm socket wrench, while doing so the tabs break off -arrows 1-.
–  Pull out bearing bolt.
–  Remove brake pedal.
Installing:
Installation is carried out in the reverse order.
  N46-10187
–  Insert the bearing axle and turn clockwise in -direction of arrow- using a 10 mm socket wrench until the tabs -arrows 2- rest against the stop.
–  Install the foot controls → Chapter.
–  Clip the brake pedal onto the brake servo unit → Chapter.
  N46-10188

Brakes, hydraulics, regulator, servo > < Removing and installing the foot controls as of MY 2011