skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Remove and install cable lock for selector cable from plastic relay lever > < Plastic relay lever as of 06.07

Fabia Mk2

Removing and installing plastic relay lever
Removing and installing plastic relay lever
   
–  Pull forward the locking mechanism as far as the stop in -direction of arrow 1-, then lock by turning to the left in -direction of arrow 2-.
l  Before removal, the cable lock must be separated from the selector cable in order to avoid damage to the selector cable.
l  Gearbox shift lever is located in the neutral position.
  S34-1116
The relay lever is secured with a catch -arrow 1- on the gearshift cover
–  Carefully press down the catch -arrow 1- up to the stop.
–  Afterwards move relay lever in its bearing point back and forward (direction of operation). To do so, carefully pull out the cable lock.
l  Only remove cable lock on removed relay lever → Fig..
  Note
To install, grease bearing points and friction surfaces with grease -G 000 450 02-.
–  Press cable lock onto the relay lever → Fig..
–  Insert relay lever together with cable lock.
l  The catch -arrow 1- secures the relay lever.
l  The cable lock must be located behind the catch -arrow 2-.
  N34-10889
The relay lever is secured with a clip -arrow°1- on the gearshift cover
–  Remove the clip -arrow 1- from the opening in the relay lever.
–  Afterwards, pull the relay lever together with the cable lock out of its bearing point in the gearshift cover.
l  Only remove cable lock on removed relay lever → Fig..
  Note
To install, grease bearing points and friction surfaces with grease -G 000 450 02-.
–  Press cable lock onto the relay lever → Fig..
–  Insert relay lever together with cable lock.
–  Secure the relay lever with a clip -arrow 1-.
  N34-11155

Remove and install cable lock for selector cable from plastic relay lever > < Plastic relay lever as of 06.07