Removing and installing, setting angular clutch pedal switch -F36-, (Fabia II 2007 ►; Roomster 2006 ►) |
Note The clutch pedal switch -F36- may only be installed once to ensure that it has an adequately tight fit in the bracket. |
–
| Unplug connector from the clutch pedal switch -F36-. |
–
| Turn clutch pedal switch -F36- 90° to the left and remove it from the support. |
–
| Remove tappet up to the stop |
–
| Press down the clutch pedal by hand as far as possible. |
–
| Insert clutch pedal switch into the support and turn switch 90° to the right. |
–
| Insert connector for the clutch pedal switch -F36-. |
|
|
|