Fabia Mk2
| Summary of components - Control cables |
Note| Grease bearing and friction surfaces with grease -G 000 450 02-. |
| 1 - | Shift cable |
| q | slacken from the shift lever guide within the shift mechanism |
| q | press onto the selector angle guide within the shift mechanism |
| q | connect with cable lock -Pos. 11- |
| q | Fitting position → Chapter |
| q | after installing, set shift mechanism: |
| t | Fabia II, Roomster → Chapter |
| t | Rapid → Chapter |
| 2 - | Selector cable |
| q | slacken from selector angle plate within the shift mechanism |
| q | press onto selector angle plate within the shift mechanism |
| q | at selector angle plate |
| q | connect with cable lock -Pos. 10- |
| q | Fitting position → Chapter |
| q | after installing, set shift mechanism: |
| t | Fabia II, Roomster → Chapter |
| t | Rapid → Chapter |
| 3 - | Bush |
| 4 - | Lock washer |
| q | do not damage cables when removing |
| q | always replace → Electronic Catalogue of Original Parts |
| 5 - | Shift housing |
| 6 - | Cable support |
| q | made out of plastic or metal |
| 7 - | Bush |
| q | Mounting of cable support to gearbox |
| 8 - | Spacer sleeve |
| 9 - | 20 Nm |
| q | 3 pieces |
| q | for cable support |
| 10 - | Cable lock |
| q | for selector cable → Fig. |
| q | after installing, set shift mechanism: |
| t | Fabia II, Roomster → Chapter |
| t | Rapid → Chapter |
| 11 - | Cable lock |
| q | for shift cable → Fig. |
| q | after installing, set shift mechanism: |
| t | Fabia II, Roomster → Chapter |
| t | Rapid → Chapter |
| 12 - | Lock washer |
| q | always replace → Electronic Catalogue of Original Parts |
| q | it is not necessary, if it is a plastic relay lever |
| 13 - | Bush |
| q | it is not necessary, if it is a plastic relay lever |
| 14 - | Reversing lever |
| q | Fitting position → Fig. |
| q | after installing, set shift mechanism: |
| t | Fabia II, Roomster → Chapter |
| t | Rapid → Chapter |
| q | as of 06.07 the relay level is made of plastic |
| q | Removing and installing plastic relay lever together with cable lock → Chapter |
| q | If the relay lever is made of plastic, neither the bushings -Pos. 13- nor the lock washer -Pos. 12- are required |
| 15 - | Sliding shoe |
| 16 - | Gearshift lever |
| q | with balancing weight |
| q | Fitting position → Fig. |
| q | after installing, set shift mechanism: |
| t | Fabia II, Roomster → Chapter |
| t | Rapid → Chapter |
| 17 - | 20 Nm |
| q | always replace → Electronic Catalogue of Original Parts |
| 18 - | Lock washer |
| q | always replace → Electronic Catalogue of Original Parts |
| q | is not required on cable locks for selector cable at relay lever, if relay lever is made of plastic |
|
|
| Cable lock | Clearance „a“ |
| Shift cable at gearbox shift lever | 10 mm |
| Selector cable at metal relay lever | 8 mm |
| Selector cable at plastic relay lever | 10 mm |
|
|
