Change ATF or top up after repair |
Special tools and workshop equipment required |
t
| ATF filling system -V.A.G 1924- |
t
| Adapter for oil filling -VAS 6262- or -VAS 6262 A- |
t
| Quick coupling -VAS 6262/2- |
t
| Catch pan, e.g. -VAS 6208- |
Note Pay attention to all the notes and test conditions → Anchor. |
–
| Attach the reservoir of the ATF filling system as high as possible to the vehicle. |
–
| Run the vehicle on a four column lift platform or over a workshop pit, so that it will be kept horizontal. |
Note t
| Observe the disposal instructions. |
t
| The engine must not be started without ATF and the vehicle must not be towed! |
WARNING t
| When working close to the radiator, always keep a distance from the fan - risk of injury! |
t
| The fan can switch on automatically. |
|
|
|
|