skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Separating quick couplings > < Removing and installing fuel delivery unit

Fabia Mk2

Removing and installing the sender for fuel gauge displayG
Removing and installing the sender for fuel gauge display -G-
  Note
There are two types of senders for the fuel gauge display -G- installed in the vehicles.
Sender for fuel gauge display -G- type 1
Removing
–  Remove fuel delivery unit → Chapter.
   
–  Unlatch and disconnect the plug connection of the lines -3- and -4-.
–  Raise catches -1- and -2- with a screwdriver and remove the sender for fuel gauge display -G- from the bottom -arrow-.
Install
–  Insert the fuel gauge sender -G- into the guides at the fuel delivery unit and press fully upwards.
–  Fit on plugs of lines and check for correct fitting position.
–  Install fuel delivery unit → Chapter.
Sender for fuel gauge display -G- type 2
Removing
–  Remove fuel delivery unit → Chapter.
  A20-0103
–  Unlock the catches -arrows- using a screwdriver and pull out the sender for fuel gauge display -G- towards the top.
  A20-10067
–  Unlatch and disconnect the plug connection of the lines -1- (brown), -2- (blue) and -3- (black).
Install
–  Connect the wiring and check correct installation of the plug.
–  Insert the sender for fuel gauge display -G- in the guides at the fuel delivery unit and press downwards until it latches into position.
–  Install fuel delivery unit → Chapter.
  S20-0322

Separating quick couplings > < Removing and installing fuel delivery unit