skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Self diagnosis, V.A.G Inspection Service > < Removing and installing, checking the ceramic pencil type glow plugs

Fabia Mk2

  • Power unit
  • 1.2/44; 47; 51; 55 kW MPI engine
  • Technical Data
  • Technical data

Technical data
Technical data
   
Engine number
The engine number („engine identification characters“ and „serial number“) is located in the front left on the cylinder block at the engine/gearbox joint -arrow B-.
In addition, a sticker with „engine identification characters“ and „serial number“ is affixed to the timing case -arrow A-.
The engine identification characters are also indicated on the vehicle data sticker.
  S10-0191
Engine characteristics
Edition 09.2011; version 1.0
Engine identification charactersBBMBMEBZGCEVA
ManufacturedFabia II12.06 ► 05.09 01.07 ► 05.0903.08 ► 07.09
 Roomster 05.06 ► 01.0701.07 ► 05.09 
Exhaust limit values conforming toEU-4, EU-2 DDKEU-4, EU-2 DDKEU-4, EU-2 DDKEU-3
Displacementl1,1981,1981,1981,198
Power outputkW at rpm44/520047/540051/540051/5400
TorqueNm at rpm108/3000112/3000112/3000108/3000
BoreØ mm76,576,576,576,5
Strokemm86,986,986,986,9
Cylinder / valves per cylinder3/23/43/43/4
Compression ratio 10,3 : 110,5 : 110,5 : 19,5 : 1
Firing order 1-2-31-2-31-2-31-2-3
Fuel - RON unleaded 95 1)unleaded 95 1)unleaded 95 1)unleaded 91 2)
The injection and ignition systemSimos 9.1Simos 9.1Simos 9.1Simos 9.1
Lambda control2 Lambda probes 3)2 Lambda probes 3)2 Lambda probes 3)2 Lambda probes 3)
Catalytic converter1 Catalyst1 Catalyst1 Catalyst1 Catalyst
Turbochargingnononono
Exhaust gas recirculationnononono
Secondary air systemnononono
Camshaft adjustmentnononono

1) at least 91 RON in exceptional cases; although engine output is reduced
2) at least 87 RON in exceptional cases; although engine output is reduced
3) Engine version complying with exhaust emission standard EU-2 DDK only with one lambda probe before catalyst
   
Engine identification charactersCHFACGPACJLACGPB
ManufacturedFabia II05.09 ►05.09 ►08.10 ►11.11 ►
 Roomster 05.09 ►  
Exhaust limit values conforming toEU-5EU-5, EU-2 DDKEU-4, BS-4EU-5
Displacement 1,1981,1981,1981,198
Power outputkW at rpm44/520051/540055/540044/5200
TorqueNm at rpm108/3000112/3000110/375108/3000
BoreØ mm76,576,576,576,5
Strokemm86,986,986,986,9
Cylinder / valves per cylinder3/23/43/43/4
Compression ratio 10,3 : 110,5 : 110,0 : 110,4 : 1
Firing order 1-2-31-2-31-2-31-2-3
Fuel - RON unleaded 95 1)unleaded 95 1)unleaded 91 2)unleaded 95 1)
The injection and ignition systemSimos 9.1Simos 9.1Simos 9.1Simos 9.1
Lambda control2 Lambda probes2 Lambda probes 3)2 Lambda probes2 Lambda probes
Catalytic converter1 Catalyst1 Catalyst1 Catalyst1 Catalyst
Turbochargingnononono
Exhaust gas recirculationnononono
Secondary air systemnononono
Camshaft adjustmentnononono

1) at least 91 RON in exceptional cases; although engine output is reduced
2) at least 87 RON in exceptional cases; although engine output is reduced
3) Engine version complying with exhaust emission standard EU-2 DDK only with one lambda probe before catalyst
   

  • Power unit
  • 1.2/44; 47; 51; 55 kW MPI engine
  • Technical Data
  • Technical data

Self diagnosis, V.A.G Inspection Service > < Removing and installing, checking the ceramic pencil type glow plugs