skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Installing the engine > < Removing engine

Fabia Mk2

Securing the engine to the assembly stand
Securing the engine to the assembly stand
Special tools and workshop equipment required
t  Engine mount -MP1-202-
t  Hook -MP1-202/10-
t  Assembly stand -MP9-101-
t  Lifting device -MP9-201 (2024A)-
t  Bushing -T30010 (VW 540/1B)-
t  Workshop crane, e.g. -VAS 6100-
l  Separate engine from gearbox.
  WARNING
Use securing pins on the hooks and rig pins to prevent release.
   
–  Hook on lifting device -MP9-201 (2024A)- at engine and at workshop crane.
–  Lift off engine with installed engine mount -T40076- with workshop crane from engine/gearbox jack.
–  Remove engine mount -T40076-.
  N10-10297
–  For carrying out assembly work, attach the engine with the engine mount -MP1-202-, the adapter -MP1-202/10- and the sleeves -T30010- to the assembly stand -MP9-101-. The figure shows the 1.9 ltr./47 kW SDI Engine. The fixing system is identical.
  S10-0123

Installing the engine > < Removing engine