Fabia Mk2
|
I - for vehicles without air conditioning |
II - for vehicles with an air conditioning system |
1 - | Support |
q | for auxiliary equipment |
2 - | 45 Nm |
3 - | V-ribbed belt |
q | Removing and installing → Chapter for vehicles with air conditioning |
q | Removing and installing → Chapter for vehicles without air conditioning |
q | Routing of the V-ribbed belt for vehicles with an air conditioning system → Fig. |
4 - | 25 Nm |
5 - | AC generator |
q | removing and installing → Electrical System; Rep. gr.27 |
q | to facilitate positioning, drive the threaded bushings of the retaining screws at the generator slightly backwards |
6 - | 120 Nm + torque a further 90° (1/4 turn) |
q | replace |
q | The clamping surface of the screw must be free of grease and oil. |
q | When loosening and tightening counterhold the belt pulley with the counterholder -T30004 (3415)- with bolts -T30004/1 (3415/1)-. |
7 - | Belt pulley - crankshaft |
q | Clamping surface must be free of oil and grease. |
8 - | 25 Nm |
9 - | Tensioning pulley for ribbed V-belt |
10 - | AC compressor |
q | removing and installing → Heating, Air Conditioning; Rep. gr.87 |