Skoda Workshop Service and Repair Manuals > Fabia Mk2 > Power unit | 1.4/51; 59 kW TDI PD Engine | Fuel supply, gas operation | Removing and installing parts of the fuel supply system | Removing and installing the sender for fuel gauge displayG

Removing and installing the sender for fuel gauge displayG

Removing and installing the sender for fuel gauge display -G-

Removing

–	Remove fuel delivery unit → Chapter.

Note

When installing, observe the routing of the line connections.

–	Unlatch and disconnect the line contact studs -3- and -4-.

–	Raise catches -1- and -2- with a screwdriver and pull down the fuel gauge sender to remove -arrow-.

Install

–	Insert the sender for fuel gauge display -G- into the guides on the fuel delivery unit and press upwards until the catches latch into position.

–	Connect the line contact studs -3- and -4-.

–	Install fuel delivery unit → Chapter.

Skoda Workshop Service and Repair Manuals