–
| Slacken hexagonal nuts -1- and press the clamping jaws apart from each other. |
–
| Push door window upwards and secure (e.g. with adhesive tape). |
–
| Slacken the screws -2- of the window lifter (10 Nm). |
–
| Unhook clips for Bowden cables. |
–
| Separate the plug connection at the power window lifter. |
–
| Slightly raise the window lifter so that the screws -2- can be pulled through the mounting holes. |
–
| Pull the window lifter towards the bottom out of the assembly opening. |
|
|
|