skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Summary of components of outer door handle > < Remove and install window lifter

Octavia Mk1

Removing and installing window lifter motor
Removing and installing window lifter motor
  Note
The front and rear window lifters are installed in the same way.
–  Removing door trim panel → Chapter.
–  Detach damping foil → Chapter.
–  Remove window lifter → Chapter or → Chapter.
  Note
The window lifter motor can be removed in each position of the window lifter.
   
–  Release screws -arrows- and remove motor.
–  Install new motor and tighten screws -arrows- to 6.5 Nm.
–  Install the window lifter and mount the door window.
–  Glue on the damping foil → Chapter.
–  Install door trim panel → Chapter.
–  Switch ignition on and off.
–  Switch on ignition again.
–  Guide door window to the top up to the stop and activate the window lifter switch for approx. a further 3 seconds. This completes the basic setting and simultaneously activates the automatic depth run function.
  S57-0066

Summary of components of outer door handle > < Remove and install window lifter