skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Modified track rods > < Repairing power-steering gear (ZF)

Octavia Mk1

Modified track rod ends
Modified track rod ends
The manufacturing process for the track rod ends was optimized. The outer shape and length of the thread stem do not change through this.
The track rods must be adapted according to the modified track rod ends → Chapter.
Installed as of:
Vehicle identification number TMBZZZ1U2W2074066
   
Distinguishing features of the previous track rod ends
1 - Wrench contact area on the shank, with marking „R“ or „L“ wrench size 22 mm dimension -a- = 74 -1 mm. The shank -arrow- is round.
  WARNING
These track rod ends must not be installed on track rods which have the dimension length -a- → Chapter.
  N48-0355
Distinguishing features of the modified track rod ends
A - Right track rod end
1 - Hexagon on thread stem, wrench size 19 mm dimension -a- = 94 + 0.5 mm marking „A“ for the right
B - Left track rod end
1 - Hexagon on thread stem, wrench size 19 mm dimension -a- = 94 + 0.5 mm marking „B“ for the left
  WARNING
These track rod ends must not be installed on track rods which have the dimension length -a- → Chapter.
  N48-0354

Modified track rods > < Repairing power-steering gear (ZF)