skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the power-steering gear - LHD vehicles > < Summary of components of power-steering gear - LHD vehicles

Octavia Mk1

Removing and installing hydraulic oil reservoir
Removing and installing hydraulic oil reservoir
Special tools and workshop equipment required
t  Pliers for spring strap clamps
t  Hydraulic oil -TL 52 146-, -N 052 146 00- e.g. -PENTOSIN CHF 11 S (G 002 000)-
   
1 - Reservoir with screw cap and oil dipstick
t  Tighten screw cap to 2 Nm
t  Check the level of hydraulic oil, top up if necessary → Chapter
2 - Return-flow line
t  The longitudinal markings -A- must be flush
t  Fit the spring strap clamp onto the hose as far as the lateral marking -B-
3 - Spring strap clamp
t  to open and close use pliers for spring strap clamps
t  The tensioning eyes must face to the top
4 - Suction line
t  The longitudinal markings -A- must be flush
t  Fit the spring strap clamp onto the hose as far as the lateral marking -B-
5 - 10 Nm

   

Removing and installing the power-steering gear - LHD vehicles > < Summary of components of power-steering gear - LHD vehicles