Octavia Mk1
| Summary of components of coolant pump |
| 1 - | Main drive-toothed belt |
| q | removing and installing, tensioning → Chapter. |
| 2 - | Coolant pump |
| q | check smooth operation |
| q | replace completely if untight or damaged |
| q | removing and installing → Chapter |
| 3 - | 10 Nm |
| 4 - | Rear timing belt guard |
| 5 - | Top toothed belt guard |
| 6 - | Bottom toothed belt guard |
| 7 - | V-ribbed belt pulley of crankshaft |
| q | pay attention to locating element when installing |
| q | Removing and installing ribbed V-belt → Chapter. |
| 8 - | 90 Nm + torque a further 1/4 turn (90 °) |
| q | replace |
| q | slightly oil before assembly |
| q | tightening may occur in successive stages |
| q | the torquing angle can be measured with a commercially available angle measuring plate, e.g. -Hazet 6690- |
| 9 - | Washer |
| 10 - | 20 Nm |
| 11 - | Guide pulley |
| 12 - | Timing belt gear - crankshaft |
