Octavia Mk1
Coolant regulator - Summary of components |
1 - | Self-tapping screw |
2 - | from bottom of radiator |
q | → Anchor, pos. 15 |
3 - | Connection fittings |
4 - | O-ring |
q | replace |
5 - | Coolant regulator |
q | Functional test: Heat thermostat in water bath, the thermocouple pin must move out |
q | Temperature test: Opening start (approx. 84 °C) and opening end (approx. 98 °C) |
6 - | to the expansion reservoir |
7 - | to heat exchanger |
8 - | from compensation bottle |
9 - | Retaining clip |
10 - | from heat exchanger |
11 - | Cooling pump housing at cylinder block |
12 - | Gasket ring |
q | replace |
13 - | Connecting tube |
14 - | Coolant regulator housing |
15 - | 10 Nm |
16 - | Coolant temperature sender -G62 - |
q | test → 1.4 ltr./55 kW Engine - Fuel Injection and Ignition System; Rep. Gr.24 |
17 - | Plug |
18 - | towards top radiator |
q | → Anchor, pos. 3 |