| Carefully observe the following 5 rules for cleanliness when working on the fuel supply/injection system: |
| t
| Thoroughly clean the connection points and their surroundings before releasing. |
| t
| Place removed parts on a clean surface and cover. Do not use fuzzy cloths! |
| t
| Carefully cover or close opened components if the repair is not completed immediately. |
| t
| Only install clean parts: Remove spare parts from their wrapping immediately before fitting. Do not use any parts which have been stored unwrapped, e.g. on a shelf. |
| t
| When the system is open: Avoid using compressed air. Avoid moving the vehicle. |
|
|
|
