Octavia Mk1
| Disassembling and assembling top part of intake manifold - valid 08.97 ? |
| 1 - | Top part of intake manifold |
| q | removing and installing → 1,8l/92 kW Engine, Mechanical Components; Rep. Gr.15 |
| 2 - | Vacuum hose |
| q | to the fuel pressure regulator |
| 3 - | Distributor part |
| 4 - | Vacuum hose |
| q | to top part of the intake manifold |
| 5 - | Vacuum connection |
| q | to the non-return valve for vacuum reservoir - pos. 17 |
| 6 - | Vacuum hose |
| q | To intake hose |
| 7 - | Vacuum hose |
| q | To the brake servo unit |
| 8 - | Support |
| q | for throttle control cable |
| q | Adjusting throttle control cable: → 1.8 ltr./92 kW Engine, Mechanical Components; Rep. Gr.20 |
| 9 - | Gasket |
| q | replace |
| 10 - | Ventilation hose |
| q | from activated charcoal filter system solenoid valve 1 -N80- */** |
| q | Activated charcoal filter system → 1,8l/92 kW Engine, Mechanical Components; Rep. Gr.20 |
| 11 - | 10 Nm |
| 12 - | Coolant hose |
| q | to heat exchanger |
| 13 - | Coolant hose |
| q | to the “T” union |
| 14 - | Connector |
| q | black, 8 pin |
| q | for throttle valve control unit -J338- |
| q | insert or remove plug when the ignition is switched off |
| 15 - | Vacuum hose |
| 16 - | Throttle valve control unit -J338-* |
| q | check → Chapter |
| q | Components of the throttle valve control unit -J338- |
| – | Throttle valve positioner -V60- |
| – | Sender for throttle valve positioner - G127- |
| – | Throttle valve potentiometer -G69- |
| – | Idling switch -F60- |
| q | when replacing, perform adaptation to the engine control unit → Chapter |
| 17 - | Non-return valve |
| q | for vacuum reservoir, which is integrated into the intake manifold |
| q | pay attention to correct fitting position; the valve does not function if it is incorrectly assembled, otherwise reduced acceleration |
| 18 - | Vacuum unit |
| q | for variable intake manifold changeover |
| 19 - | Valve for variable intake manifold changeover -N156- |
| 20 - | Vacuum hose |
| 21 - | Fuel pressure regulator |
| 22 - | Retaining clip |
| 23 - | Fuel rail with injection valves |
| 24 - | Fuel feed line |
| q | secure hose with spring strap clip |
| q | from fuel filter → 1.8 ltr./92 Engine, Mechanical Components; Rep. Gr.20 |
| 25 - | Fuel return-flow line |
| q | secure hose with spring strap clip |
| q | check for firm seating |
| q | to fuel delivery unit in fuel tank → 1.8 ltr./92 kW Engine, Mechanical Components; Rep. Gr.20 |
| 26 - | 20 Nm |
| 27 - | Support |
| q | for the intake manifold cover |
