Octavia Mk1
| Disassembling and assembling bottom part of intake manifold - valid ? 07.97 |
| 1 - | Cable guide |
| q | clipped on to fuel rail |
| 2 - | Connector |
| q | Knock sensor 1 -G61-, black plug |
| q | Knock sensor 2 -G66-, brown plug |
| q | Engine speed sender -G28-, grey plug |
| 3 - | Connector |
| q | for hall sender -G40- |
| 4 - | Vacuum hose |
| q | to top part of the intake manifold |
| 5 - | Fuel pressure regulator |
| q | Testing fuel pressure regulator and holding pressure → Chapter |
| 6 - | O-ring |
| q | replace if damaged |
| 7 - | Retaining clip |
| 8 - | 10 Nm |
| 9 - | Gasket |
| q | replace |
| 10 - | Intermediate flange |
| q | check for tears |
| 11 - | Warm-type clamp |
| q | replace by screw clamp |
| 12 - | Bottom part of intake manifold |
| 13 - | Fuel distributor |
| 14 - | Fuel feed line |
| q | secure hose on fuel distributor with spring strap clamps |
| q | hose with a white marking |
| 15 - | Fuel return-flow line |
| q | secure hose on fuel distributor with spring strap clamps |
| q | hose with a blue marking |
| 16 - | Injector (-N30- to -N33-)*/** |
| q | check → Chapter |
| 17 - | Retaining clip |
| q | check tightness on the injection valve and fuel distributor |
