skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing coolant regulator > < Removing

Octavia Mk1

Install
Install
Installation is performed in the reverse order. Pay attention to the following points:
–  Clean sealing surface for O-ring.
   
–  Moisten new O-ring -3- with coolant and fit onto coolant pump.
–  Position the coolant pump -2- in the cylinder block and tighten the fixing screws -1-.
   Tightening torque: 15 Nm
  Note
The plug on the housing for the coolant pump points downwards.
  N19-0234

Removing and installing coolant regulator > < Removing