skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Fuel supply, gas operation > < Removing

Octavia Mk1

Install
Install
Installation is carried out in the reverse order. Pay attention to the following:
–  Clean sealing surface for O-ring.
   
–  Moisten new O-ring -3- with coolant and fit onto connection fitting -2-.
–  Fit coolant regulator -4- in the connection fitting -2- and turn 90° (1/4 turn) to the right.
  Note
Coolant thermostat arms must be virtually vertical.
–  Insert the connection fitting -2- with coolant regulator -4- in the cylinder block.
–  Tighten fixing screws -1-.
   Tightening torque: 15 Nm
  S19-0099

Fuel supply, gas operation > < Removing