skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuel level sender 2 G169 . > < Vehicles with 4 x 4 drive

Octavia Mk1

Removing and installing the fuel gauge senderG
Removing and installing the fuel gauge sender -G-
Removing
–  Remove fuel pump → Chapter.
   
–  Unlatch and disconnect the line contact studs -1 ... 3-.
  Note
When assembling observe the position of the line connections.
–  Raise catches -4- and -5- with a screwdriver and remove the fuel gauge sender -G- from the bottom -arrow-.
Install
–  Insert the fuel gauge sender -G- into the guides on the fuel pump and press upwards until the catches latch into position.
–  Install fuel pump → Chapter.
  S20-0162

Removing and installing fuel level sender 2 G169 . > < Vehicles with 4 x 4 drive