Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing coolant regulator >
< Removing
Octavia Mk1
Drive unit
1.9 l/96 kW (TDI) Engine, Mechanics
Engine cooling
Removing and installing radiator, coolant pump, coolant regulator / moving_and_installing_coolant_pump/">Removing and installing coolant pump
Install
Install
Install
Installation is performed in the reverse order. Pay attention to the following points:
–
Clean sealing surface for O-ring.
–
Moisten new O-ring
-3-
with coolant and fit onto coolant pump.
–
Position the coolant pump
-2-
in the cylinder block and tighten the fixing screws
-1-
.
Tightening torque: 15 Nm
Note
The plug on the housing for the coolant pump points downwards.
–
Install and tension timing belt
→ Chapter
.
–
Top up coolant
→ Chapter
.
Drive unit
1.9 l/96 kW (TDI) Engine, Mechanics
Engine cooling
Removing and installing radiator, coolant pump, coolant regulator / moving_and_installing_coolant_pump/">Removing and installing coolant pump
Install
Removing and installing coolant regulator >
< Removing