skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing coolant pump > < Removing

Octavia Mk1

Install
Install
Installation is performed in the reverse order. Pay attention to the following points:
  Note
t  Replace gasket rings and O-rings.
t  Secure all hose connections with corresponding hose clips.
   
–  Tighten thermoswitch -1- to 35 Nm.
–  Fit on brackets -2- and -3- at radiator as shown.
–  Tighten bolts attaching plastic radiator shroud and radiator mounts to 10 Nm.
–  On vehicles with air conditioning, tighten bolts attaching condenser and bracket for coolant pipe to 10 Nm.
–  Top up coolant → Chapter.
–  Install headlights → Electrical System → Rep. Gr.94.
–  Electrical connections and proper routing → Current flow diagrams and Fitting locations.
  S19-0053

Removing and installing coolant pump > < Removing