skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Major electrical assignments and major plug connections > < Removing and installing relay and fuse holder

Octavia Mk1

Removing and installing fuse holder
Removing and installing fuse holder
Removing:
–  Carefully lever off the side cover on the left side of the dash panel.
   
–  Unscrew both fixing screws -B- (2 Nm), then press the catches -C- and while doing so pull the fuse holder out of the dash panel.
Installing:
–  Carry out the installation in the same way in reverse order.
  Note
The assignment of the fuse holder can always be taken from the valid current flow diagram → Current Flow Diagrams, Electrical Fault Finding, Fitting Locations
  A97-0028

Major electrical assignments and major plug connections > < Removing and installing relay and fuse holder